Job Submitted by:
Mike Bradshaw		
Open Source Instruments Inc.
(781) 736-2926

Shipping Address:
Lab Supplies
415 South Street
Waltham, MA 02454


The A3001101A is the Brandeis University HEP part number of the
"A30011" printed circuit board Version 01A.

The printed circuit board is described by files with the following 
extensions. It has top and bottom overlay, top and bottom solder mask, three
copper signal layers and a copper ground plane.

Extension	Meaning
.GTO		gerber top overlay (top silk screen)
.GTS		gerber top solder mask (top mask)
.GTL		gerber top layer (top copper)
.GM1       	 gerber middle layer one (middle layer one copper)
.GGD		gerber ground plane (negative image)
.GBL		gerber bottom layer (bottom copper)
.GBS		gerber bottom solder mask (bottom mask)
.GBO		gerber bottom overlay (bottom silk screen)
.DRL		drilling instructions
.PCB		TraxMaker design file
.NET		TraxMaker net list
.TOL		tool specification
.TXT		text version of the drilling instructions
.APT		aperture specification file
.GTP		gerber top paste
.GBP		gerber bottom paste
.PIK		pick and place file
.BOM		bill of materials

The layer stack-up is as follows, from top to bottom:

GTL, GGD, GM1, GBL

The board is 4.885" by 2.201". 

